Home > Products > Replace Diesel Glow Plugs

Replace Diesel Glow Plugs Manufacturers

So as to give you ease and enlarge our company, we also have inspectors in QC Team and assure you our greatest support and product or service for Replace Diesel Glow Plugs,Glow plug,8V Glow plug,8V Replacing Glow Plugs,Diesel Glow Plug 8v, The principle of our company is to provide high-quality products, professional service, and honest communication. Welcome all friends to place trial order for creating a long-term business relationship.
Replace Diesel Glow Plugs, With the advanced workshop, qualified design team and strict quality control system, based on mid- to high-end marked as our marketing positioning, our merchandise are fast selling onto European and American markets with our own brands such as below Deniya, Qingsiya and Yisilanya.

Related Products

Hot Products

  • 90 Flame Detector

    90 Flame Detector

    Product:The Torbo® 90 Flame Detector made in China
    Application:Webasto Thermo 90ST heater Flame Detector 24V
    Model:TB18-30-2
    MPN:9010617A
    Material:Hot Pressed Silicon Nitride
    Detector dia.:3mm
    Rated Voltage:18V
    Current:1.3-2.2A
    Power:25-44W
  • Ceramic Glow Plug

    Ceramic Glow Plug

    The Torbo® Ceramic Glow Plug from China factory enables the glow plug to reach higher temperatures more quickly for fast engine start-up. Note: good-condition, high-quality glow plugs heavily reduce exhaust gases emitted by your vehicle, keeping your environmental impact to a minimum.
  • hot surface igniters

    hot surface igniters

    Our gas appliance and heating system igniter offers exceptional durability, maintaining full functionality even after enduring 100,000 cycles of 30 seconds on and 2 minutes off. With a robust ignition system and a rapid heating capability, it ensures a 100% success rate in igniting gas appliances, reaching 1000℃ in just 17 seconds. Moreover, it maintains consistent thermal performance, with a steady temperature range of 1100-1200℃ and no signs of aging.
    5.High strength,toughness and hardness,anti-oxidation and anti-corrosion
    Welcome to buy The Torbo® hot surface igniters from us China factory.
  • Silicon Nitride Surface Igniter

    Silicon Nitride Surface Igniter

    The Silicon Nitride Hot Surface Igniter is a hot surface igniter commonly used to ignite gas or petroleum fuels. It is made of silicon nitride and can withstand high temperatures, corrosion and wear. It is more durable and reliable than igniters made of other materials. You can rest assured to buy customized Silicon Nitride Surface Igniter from us. Torbo look forward to cooperating with you, if you want to know more, you can consult us now, we will reply to you in time!
  • Espar Glow Pin

    Espar Glow Pin

    The Torbo® Espar Glow Pin made in China is suitable for parking heater. For heating, spark ignition sensor vehicle auxiliary heating heating in cold areas, the use of silicon nitride, can quickly make the fuel gasification, ignition, combustion. Therefore, after the engine starts soon, as well as idle stop, the car temperature can rise rap
  • Ceramic Low Voltage Glow Plug

    Ceramic Low Voltage Glow Plug

    The Torbo® Ceramic Low Voltage Glow Plug made in China enables the glow plug to reach higher temperatures more quickly for fast engine start-up. A ceramic low voltage glow plug is a specialized heating element used in some diesel engines to aid in cold starting. Glow plugs are important in diesel vehicles, especially in colder climates, where the fuel may not ignite easily due to low temperatures..
  • Related Blog
  • Reviews

  • Aluminum Nitride Substrate

    Aluminum nitride substrate: a. Raw material: AIN is a non-natural presence but a artificial mineral in 1862, was first synthesized by Genther et al. The representation of the representation of the Aln powder is to reduce the nitride method and the direct nitridation method. The former is reacting with a high purity carbon reduction in A1203, and then reacts with nitrogen, and the latter is directly Nitriding. ;

  • Metal of Ceramic Substrates

    Film Law: Metallization by vacuum coating, ion plating, sputtering coating, etc. However, the coefficient of thermal expansion of the metal film and the ceramic substrate should be as best as possible, and the adhesion of the metallization layer should be improved;

  • Are furnace ignitors universal?

    This universal ignitor is a replacement part for use in gas-fired appliances like furnaces, water heaters, and boilers, compatible with over 150-OEM models.

  • How do I know if my pellet stove igniter is bad?

    If the igniter fails to heat up or ignite the pellets, it could be a sign of a faulty igniter. This can manifest as the pellets not lighting, the stove not starting, or the flame not staying lit.

  • Silicon Carbide Substrate

    Application: For silicon carbide substrates, long extension, multiple use of low voltage circuits and VLSI high cooling packages, such as high speed, high integration logic LSI tape, and super large computers, Light communication credit laser diode substrate application, etc.

  • How does a pellet stove igniter work?

    Ceramic igniter are PTC ceramic elements: PTC ceramic materials are named for their positive thermal coefficient of resistance (i.e., resistance increases upon heating). That mean that they have a highly nonlinear thermal response, so that above a composition-dependent threshold temperature their resistance increases rapidly. This behavior causes the material to act as its own thermostat, since current passes when it is cool, and does not when it is hot, so the temperature stabilize at a certain tempereture (950~1000°C).

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept